Skip to main content
BORUIDA METAL

Manufacturing

Equipment and process behind each part

How a drawing moves through our workshop bays: fabrication, gantry machining and inspection.

What do you make it on?

Equipment and workshop evidence

Photographs from the workshop. They show the kind of work and equipment involved, not a full equipment list.

  1. Large white, black and red gantry machining centre in a workshop bay with a worked steel part on the floor

    01 / Gantry machining

    Large-format gantry machining

    A gantry machining centre handles large welded structures in one setup range. Stated repeat positioning is up to 0.01 mm, and the maximum envelope is 8 m × 3.2 m × 1.4 m.

    • Repeat positioning up to 0.01 mm
    • Envelope up to 8 m × 3.2 m × 1.4 m
  2. Four large grey welded box-section beams with machined plates in a workshop bay

    02 / Welding and fabrication

    Welded box structures

    Plate and section are welded into box beams and frames. Declared steel-structure capacity is 300 tonnes a month and 10 tonnes a day.

    • 300 tonnes/month declared
    • 10 tonnes/day declared
  3. Close-up of a rippled weld bead running down a metal surface

    03 / Weld seam detail

    Seams you can look at closely

    A close view of a finished weld bead on metal. Weld requirements for your part are set by your drawing and agreed before production.

    • Detail from a fabricated part
    • Requirements taken from your drawing
  4. Long workshop bay with overhead cranes and red-coated structural members with machined flange ends on the floor

    04 / Workshop bays

    Three workshop bays, 7,000 m²

    Fabricated members move through bays with overhead cranes. The photograph shows red-coated structural members with machined flange ends in a bay.

    • 7,000 m² facility
    • Three workshop bays

What happens after I send a drawing?

Five steps from drawing to inspected part

  1. 01

    Send the drawing

    Share drawings or specifications, material, quantity and the finish you need through the quote form.

  2. 02

    Review and quote

    We read the drawing, raise open questions and reply with a quote and a stated lead time for your part.

  3. 03

    Sample if needed

    A sample can be made before a larger run, and MOQ can be a single piece.

  4. 04

    Fabricate and machine

    Cutting, welding and machining run across our three workshop bays against your drawing.

  5. 05

    Inspect and report

    Inspection reports can be supplied, and third-party inspection is supported when you require it.